ALTERNATE LIGHT SOURCE FOR CONVENTIONAL LANTERNS
Direct Incandescent Replacement : WM-R604LED
Major Energy Reduction, Reduces Light Pollution, Reduces Maintenance
WM-ML300 Marine Lantern comprises a 300mm acrylic fresnel lens with an integral birdspike mounted on a rugged, cast aluminium alloy lantern base.
WM-R604LED Retrofit Light Source is provided as an option to directly replaced conventional flasher and lampchanger fitted with incandescent lamps. Equipped with an intelligent LED controller PCB, as those used within our wide range of LED lanterns, to ensure highest efficiency, reliability and consistent output intensity.
WM-R604LED could be directly installed within lantern assemblies without any modification. Optional AC/DC converter (mounted inside lantern assemblies) needed for AC power supply.
The LED retrofit assembly is rated at approximately 4 watts. The output intensities, photocell sensitivity and flash characteristics are user configurable by means of WM software via RS232 serial communication lead (provided as required).
Site programming can also be done via the WM universal InfraRed programmer.
|Operating Voltage||:||5-36V DC (12V nominal)|
|Flash Rhythm||:||IALA256 (configurable)|
|Daylight Sensitivity||:||300 lux ± 50 lux (configurable)|
|Environmental Temperature||:||-30°C to +70°C|
|Relative Humidity||:||100% (condensing)|
|Colour||:||Red, Green, Yellow, White, Blue (IALA standards)|
|Power Rating||:||approx. 4W to 12W (300mA)|
|LED Current Setting||:||Configurable|
|Effective Range||:||up to 12 nautical miles (T=0.74, ‘ON’ time = 0.5s in red, green & white)|
|LED Array Lifespan||:||1 by 6 configurations (100,000 hours)
Advanced 4 by 5 high intensity light emitting source
|Remote Monitoring||:||GPRS / GSM / VHF (optional)|
LED Flasher/lampholder is designed and made for use with Marine Lanterns having Lens diameter from 130mm to 300mm.
Parts are recommended retrofits to a specific Wealth Marine’s LED holder model and are designed specifically to operate in those models.
Units could be easily fitted into other manufacturer’s conventional lantern with customized brackets (details to be advised by customer).